Skip to content 
Dissolved Oxygen Sensor
FDO-99 Optical Dissolved Oxygen Sensor
FDO-99 Optical Dissolved Oxygen Sensor employs advanced fluorescence quenching technology to measure the dissolved oxygen content in water. The sensor requires minimal maintenance and offers an extended service life. It is also less affected by common interfering substances, resulting in superior accuracy and stability.
Product Features
- No replacement of solid-state electrodes, membranes, or electrolytes is needed; requires minimal maintenance.
- Consumes no oxygen during measurement; has minimal flow or stirring requirements.
- Utilizes imported German fluorescent membranes, ensuring high measurement linearity and minimal long-term drift.
- The sensor membrane boasts an average service life of over 2.5 years.
- Stable measurements unaffected by common interfering substances such as H₂S, CO₂, NH₃, SO₄²⁻, Cl⁻, Cl₂, etc.
- Features fully digital signal output and supports a wide power supply voltage range.
- Integrated temperature sensor for automatic temperature compensation.
- Built-in protection against reverse connection of power supply and misconnection between power and RS-485 lines.
Product Parameters
FDO-99SE Aquaculture-Specific Dissolved Oxygen Sensor
(For Freshwater and Seawater Aquaculture)
表格
| Parameter | Specification |
|---|---|
| Measurement Accuracy | ±2.5% F.S. or 0.5 mg/L |
| Response Time (T90) | Less than 90 seconds |
| Operating Pressure | 0-0.1 MPa |
| Sensor Cap Life | 1-2 years |
| Sensor Housing Material | POM |
| Mounting Method | 3/4″ NPT threaded mounting |
| Probe Dimensions | Φ32 × 155 mm |
FDO-99SH Universal Dissolved Oxygen Sensor
(Suitable for general industrial processes, wastewater treatment, and environmental monitoring)
表格
| Parameter | Specification |
|---|---|
| Measurement Accuracy | ±1% F.S. or 0.2 mg/L |
| Response Time (T90) | < 60 seconds |
| Operating Pressure | 0-0.2 MPa |
| Sensor Cap Life | 2 years |
| Sensor Housing Material | 316L stainless steel |
| Mounting Method | 3/4″ NPT threaded connection |
| Probe Dimensions | Φ41 × 140 mm |
| Weight | 1000g |
FDO-99SH Universal Dissolved Oxygen Sensor
(Suitable for general industrial processes, wastewater treatment, and environmental monitoring)
表格
| Parameter | Specification |
|---|---|
| Measurement Accuracy | ±1% F.S. or 0.2 mg/L |
| Response Time (T90) | < 60 seconds |
| Operating Pressure | 0-0.2 MPa |
| Sensor Cap Life | 1-2 years |
| Sensor Housing Material | Titanium |
| Mounting Method | 3/4″ NPT threaded connection |
| Probe Dimensions | Φ41 × 140 mm |
| Weight | 900g |
