AnalyDisin SEN digital disinfectant sensor adopts a constant‑voltage three‑electrode system and supports measuring residual chlorine, chlorine dioxide, and ozone. Built‑in pH & temperature real‑time compensation, electrochemical self‑cleaning, RS485 Modbus RTU output, zero‑reagent consumption for online water disinfection monitoring.

Typical Applications
- Drinking Water Safety Finished water of waterworks, pipe network end, secondary water supply, agricultural water improvement.
- Industrial Processes: RO feed water, circulating cooling water, boiler feed water.
- Healthcare & Sanitary Monitoring: Medical wastewater, disinfection monitoring for post-disaster water sources.
- Other Scenarios: Swimming pool water, hot spring water, seawater desalination disinfection.
Product Features
- Measurement Method: Three-electrode system with constant potential, shared pH reference, real-time pH & temperature compensation for high measurement accuracy.
- Rich Measurable Parameters: Simultaneously monitor water temperature, pH, free chlorine, chlorine dioxide, and ozone. Hypochlorous acid concentration can be displayed synchronously when measuring free chlorine.
- Cleaning Technology: Real-time non-destructive electrochemical cleaning, no abrasion to electrodes, no extra cleaning consumables required.
- Precise Compensation: High-precision pH compensation algorithm developed through big data calculation and in-depth deduction of chemical reaction principles.
- Low Maintenance: Combined online electrochemical cleaning & mechanical cleaning solution, greatly reducing manual maintenance workload.
- Low Operation Cost: Consumable-free design among various disinfectant monitoring methods, significantly cutting long-term operation cost.
- Eco-friendly: No reagent dosing, no waste liquid generated. Sample water can be recycled, achieving zero discharge and zero pollution.
- Liquid Level Detection (Optional): Liquid level detection module available for low-water alarm. Electrochemical cleaning automatically stops under water shortage to protect electrodes.
- Wireless Transmission (Optional): Wireless transmission module optional for remote data access and real-time disinfection status overview.
- Easy Operation: Controlled directly by the upper computer. Calibration, parameter configuration, cleaning, and other operations are available without an additional controller.
Product Overview
AnalyDisin SEN Digital Disinfectant Sensor is a high-precision, flexibly installed disinfectant detector for water with low maintenance cost. It adopts a three-electrode system with constant potential. The sensor is equipped with an innovative multi-mode cleaning solution combining electrochemical cleaning and mechanical stirring cleaning. The pH compensation algorithm is optimized using big data and chemical reaction mechanisms, delivering superior stability and reliability compared with similar products. Optional liquid level detection and wireless transmission modules support remote management. A convenient manual drain valve helps discharge accumulated particulate impurities inside the flow cell and sensor, mitigating blockage caused by sediments. This sensor can simultaneously measure pH, temperature, and common disinfectants (free chlorine, chlorine dioxide, ozone). It is an ideal solution for online disinfectant monitoring.
Technical Specifications
| Parameter | Specification |
|---|---|
| Measurement Principle | Three-electrode system with constant potential, equipped with pH & temperature compensation |
| Electrode System | Precious metal working electrode with a special counter electrode. Shared pH reference electrode to minimize compensation error |
| Compensation Range | pH: 6.0–8.5; Temperature: 0–40°C |
| Response Time | T90 < 1 min; Continuous online measurement after stabilization |
| Measurement Cycle | Continuous online measurement |
| Activation Time | 2 h for first use; 0.5 h after water cut/power failure |
| Working Pressure | 0.15–3 bar |
| Allowable Flow Rate | 0.5–2 L/min |
| Cleaning Method | Multi-mode cleaning: real-time electrochemical non-destructive cleaning + mechanical stirring cleaning |
| Calibration | Factory pre-calibrated curve, supports single-point field calibration |
| User Interface | Upper computer control |
Performance Parameters
| Measured Parameter | Measuring Range | Accuracy | Application |
|---|---|---|---|
| Free Chlorine | 0–2 mg/L | ±0.10 mg/L or ±5% FS | Municipal water supply, secondary water supply |
| Free Chlorine | 0–5 mg/L | ±0.10 mg/L or ±5% FS @ 0–2 mg/L
±0.20 mg/L or ±5% FS @ 2–5 mg/L |
Waterworks outlet monitoring, swimming pool, disinfection process, wastewater disinfection |
| Chlorine Dioxide | 0–1 mg/L | ±0.05 mg/L or ±5% FS | Municipal water supply, secondary water supply |
| Chlorine Dioxide | 0–2 mg/L | ±0.10 mg/L or ±5% FS | Waterworks outlet monitoring, swimming pool |
| Ozone | 0–1 mg/L | ±0.05 mg/L or ±5% FS | Municipal water supply, secondary water supply |
| Ozone | 0–2 mg/L | ±0.10 mg/L or ±5% FS | Waterworks outlet monitoring, swimming pool |
Why Choose Dongrun Online Analyzers?
1μL High-precision Injection System Exclusive Patented Design.
-
Accuracy
Replaces traditional peristaltic pumps with a more accurate injection pump, achieving precision to 1μL.
-
Durable
The main components such as pumps and valves require no maintenance within one year.
-
Cost-saving
Eliminates the need for pump tubing, saving on consumable replacements.
-
Safety
Automatic activation of protective functions if the water tank is found to be empty, preventing pump damage.
Core Component Colorimetric Module Independently Developed and Manufactured
-
The colorimetric module features reference light measurement functionality
It can mitigate interference from fluctuations in light sources or temperature changes on measurement results.
-
50% increase in light source lifespan
Automatically controls light-on time to extends the lifespan of the light source, reducing aging.
-
The program automatically adjusts the intensity of the light source
No manual intervention or maintenance required.
-
The colorimetric module’s heating function is safe and reliable
Real-time monitoring of temperature rise rate, over-temperature alarm, and a fully enclosed design.

